12
Data Logging Functions (continued)
3. When data is being recorded, the recorded data is
automatically saved before the shutdown.
Note: The USB port serves as an external power supply and for data
transferring.
Recording/Data Logging Operation (Software)
1. First install software on PC following the setup
wizard (see the following “Software Installation”
section). Once software is successfully installed, the
software icon shortcut will be automatically placed
on your PC desktop.
2. Connect the meter to your PC via the supplied USB
cable.
3. Power the meter on.
4. Open the installed Data Logger Software by
double-clicking on the icon on your PC desktop.
5. On the menu bar, select the green download arrow
to download the recorded data from the meter to
the software.
6. In the Data Logger Setting menu, confirm the
sampling rate, unit of measure, probe type
(20250-92 only), and alarm limits, then select “OK”.
7. See the Help icon within the software for detailed
instructions on other software functions.
1065DGMAN_20250-92-94-96.indd 12
3/11/2016 2:03:16 PM