10
PM-000123-A - Rock Bucket Operators Manual - April 2018
For further information on spare parts please contact one of the Digga sales offi ce below your closest authorised Digga Dealer.
DIGGA INTERNATIONAL SALES OFFICES
NORTH AMERICA
EUROPE
ASIA PACIFIC
DIGGA NORTH AMERICA
2325 Industrial Parkway SW
Dyersville IA 52040
PH:
+ 1 563 875 7915
WEB:
www.diggausa.com
EMAIL:
DIGGA EUROPE
Unit 6, Smitham Bridge Road
Hungerford Trading Estate,
Hungerford, Berkshire RG17 0QU
England, United Kingdom
PH:
+44 (0) 1488 688 550
WEB:
www.diggaeurope.com
EMAIL:
DIGGA HEAD OFFICE - BRISBANE
4 Octal St, Yatala QLD 4207
PH:
(07) 3807 3330
EMAIL:
DIGGA NEW SOUTH WALES
19 Mckay Close,
Wetherill Park, NSW 2164
PH:
1300 2 DIGGA
EMAIL:
DIGGA VICTORIA
17-21 Babbage Dr,
Dandenong, VIC 3175
PH:
1300 2 DIGGA
EMAIL:
WEB:
www.digga.com
9 SAFETY PRECAUTIONS - GENERAL INFORMATION
25. Rock Bucket must be stationary before making adjustments to the equipment.
26. Rock Buckets shall be cleaned only when the mechanism is in neutral and the Rock Bucket stopped; long-handled shovels shall be
used to move cuttings from the bucket. Materials heavier than 10kgs must be moved mechanically or by using at least two people.
27. During operation, weather conditions shall be monitored: operations shall cease during electrical storms or when electrical storms
are imminent.
WHEN MOUNTING THIS PRODUCT TO YOUR MACHINE
• Refer to the operator’s manuals of your machine, and your quick-attach for special or detailed mounting instructions.
• This product should fit onto the quick-attach Frame or Hitch.
• If this product does not fit properly, contact your Digga Dealer before operating.
• Never place any part of your body into the mounting plate, frame, hitch or loader holes. A slight movement of the power unit or
this product could cause serious injury.
• Where ‘Dead Man’ connections are connected or installed it is illegal to disengage, tamper with or remove them.
BEFORE EACH USE, THOROUGHLY INSPECT THIS PRODUCT
• Make certain that all safety signs are in place and legible. Refer to the safety sign page in this manual for the placement of safety signs
for this product.
• Replace all damaged or excessively worn parts and hardware only with genuine Digga parts or with properly rated fasteners
or fittings.
• Make certain that all locking pins, latches, and connection devices are properly installed and secured.
• Make certain that all protective guards, canopies, doors, etc., are in place and secure.
WHEN OPERATING THIS PRODUCT IN ACCORDANCE WITH DESIGN INTENTIONS
• Never use Rock Bucket on a Loader that is not equipped with a cab or ROPS (Roll Over Protect Structure), and operator restraints (seat
belts or equivalent devices).
• Know your machines safe operating weight limit and the weight of loaded attachment.
• Use caution when working close to fences and ditches, or on uneven ground.
• Never get between the floor and the rock bucket weldment.
• Do not roll back this product so far that materials fall towards the operator.
WHEN ADJUSTING, SERVICING OR REPAIRING THIS PRODUCT
• Make no modifications to your Rock Bucket.
• When making repairs, use only genuine Digga parts for fasteners and use only properly rated parts.
• Replacement parts, for parts with safety signs attached, must also have safety signs attached.
