&
&
18
4.
Powers on the instrument. Pg. 4
Set Limits: Press this button to exit Set Limits and return to
Monitor/Record. Pg. 15
Monitor/Record: Powers off the instrument or stops recording
data. It will only turn off the instrument if it is not recording
and not receiving a Tach signal. Pg. 5, 9
Laps: Exits Lap/Max and returns the instrument to
Monitor/Record mode. Pg. 8
Playback: Exits Playback and returns the instrument to
Lap/Max. Pg. 9
5.
Set Limits: Changes the function being displayed in this order:
CHT/WT, EGT, Tach, Tach calibration number and minimum
Lap time. Pg. 15
Monitor/Record: Changes the function being displayed in this
order: CHT/WT, EGT, Tach, Lap # and Lap Time. Pg. 5
Laps: Displays the maximum value of each function, lap
number or total lap time for the currently selected lap. Displayed
in this order: CHT/WT, EGT, Tach, Lap # and Lap Time. Pg. 8
Playback: Changes the function playing back in this
order: CHT/WT, EGT, Tach, Lap #, and Lap Time. Pg. 9
6.
Set Limits: Button not used.
Monitor/Record: Displays the maximum value for each engine
function since the instrument was turned on. If the instrument
is displaying Lap # and you press the Max/Event button, it will
display the current Event number. Pg. 5
Laps: Displays Event number if Lap # is being displayed.
(The display will show E and two numbers.) pg. 15
Playback: Displays the maximum reading for each
function for the current lap, the current Event number or the
total Lap Time for the current lap. Pg. 9
7.
Press this button combination to clear memory, Lap # and
Event #. Press them until the display shows PrS PLA, then press
the Play/Pause button Pg. 7
8.
Toggles between high and low resolution of time display.
High =
1:59.9 max. time displayed for this resolution.
(minutes : seconds . tenths of seconds)
Low =
19:59 max. time displayed for this resolution.
(minutes : seconds) Pg. 7
9. Lap Switch
Monitor/Record: Starts and stops the recording of a lap. Pg 14
