Digalog Systems 2040D Series, Maintenance Manual

Page: 60 / 67

Series 2040 Test System
Series 2040 Maintenance Manual V2.00 Module Repair and Replacement
59
GPIB/HPIB POWER SUPPLIES
1) Remove the left side panel (side opposite the computer) to gain access to
the rear of the power supplies.
2) Disconnect the AC power cords from the AC/DC Distribution Box, and
disconnect the GPIB cable, Fault/Inhibit cable, and power output cable from
the rear of the supply.
3) If the faulty supply is the lower of two GPIB/HPIB supplies, it may be easier
to remove the upper supply first.
4) Remove the faulty supply and return for repair.
GPIB/HPIB
Supplies
PAD115-1.5L
Kikusui PD-35-20,
Kenwood PD-35-20,
Kikusui PD55-10, or
Kenwood PD56-10
This illustration shows a typical installation. Individual systems may vary from
this example.