DIG Leit WWS Operating Instructions Manual Download Page 4

6

7

and on, the user is encouraged to try to correct the interference by one or 

more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to  

 

  which the receiver is connected.

• Consult DIG technician for help.

WARNING:

 the user should make no field changes or modifications to the 

LEIT WWS or LEIT WWSE weather stations. All adjustments and changes 

must be made at DIG’s facility under the specific guidelines suggested in our 

instruction manual. Any tampering or modification to the equipment will void 

the users authority to operate the unit, render the equipment in violation of 

FCC part 15, and will void the warranty.
 

 

F.

 

Features

•  Power is provided by an efficient photovoltaic module (PVM) and 

microelectronic management system fueled by ambient light (solar) 

•  Weather data transmitted from the weather station is stored by the 

controllers and reviewable by LEIT RC2ET handsets 

•  The weather station ID number enables any controller in range to 

differentiate among multiple weather stations allowing the controller to 

receive information from several weather stations

•  Based on user input and information collected from the weather station 

sensors, a LEIT-2ET controller performs the calculations needed to override 

or adjust the daily scheduled irrigation program to compensate for 

evapotranspiration (ET)

•  Environmentally friendly, utilizes RoHS compliant components

•  The LEIT weather stations utilize radio frequency in the ISM band 902-928 

MHz (866 Hong Kong, 868 International) CE, IC, FCC certified, Australia and 

Hong Kong compliant

•  The LEIT weather station’s electronic components and sensors are 

completely waterproof

•  The rain gauge is a self-emptying tipping bucket reading rainfall in 0.01 inch 

(.254 mm) increments

•  The LEIT weather station’s three-plate radiation shield is specially designed 

to protect the sensors from reflected and radiated heat

•  The LEIT WWS and LEIT WWSE weather stations can provide information 

to the LEIT ET controllers to completely stop irrigation if it is raining, 

freezing or too windy

•  Current weather data is provided to LEIT-2ET controllers daily, every hour, 

during daylight hours only

•  The weather stations function both day and night in any weather and in 

most outdoor locations and only transfer weather data during daylight hours

•  Rugged and lightweight plastic construction
•  Three-year manufacturer’s warranty

Technical Specifications:

•  Weather Station power requirements for normal operation: 

 

Minimum of 3,000 LUX

•  PVM power output 35 W/M

2

 at 100,000 LUX (231 W/M

2

) +/- 20%

•  Input: 3,000-100,000+ LUX
•  Wireless transmitter power and frequency specifications: -7 dBm @ 920 

MHz / 7 dBm @ 868 MHz / -7 dBm @ 866 MHz

Summary of Contents for Leit WWS








Reviews: