DIG Corporation
| 1210 Activity Drive | Vista, California 92081 | www.digcorp.com | 800.322.9146 | 760.727.0914 | fax 760. 727.0282
Micro Sprayers
Multi-head micro sprinkler on spike | model 8855-1GB
Installation:
Punch hole in the 1/2 in. poly tubing and snap
the barb on the end of the micro tubing into
the 1/2 in. poly tubing. It is recommended to
mount the micro sprinkler a minimum of 8 in.
above the ground.
Micro Sprinkler on Spike
Microaspersor con estaca
qw
er
40
Bridge
360°
Black
Up to 26 ft.
Diameter
180°
Red Insert
9-12 ft. Radius
90°
Black Insert
10-12 ft. Radius
2 x 30°
Blue Strip Insert
10-12 ft.
Diameter
Designed for large diameters (up to 25 ft. full circle). Can be used on flowerbeds, trees, groundcover, slopes
or for seed germination. Flow rate 18.3 GPH at 15-25 PSI.
Recommended spacing 12 ft. to 15 ft. Up to 10 micro sprinklers may be used on the same 1/2 in. poly
tubing line with 25 PSI. The slow, uniform application of small droplets makes DIG micro sprinklers the
ideal method to achieve deep watering with reduced runoff and evaporation loss.
To change insert, hold frame stationary and:
1)
Remove green nozzle by turning counter clockwise
2)
Remove black spinner
3)
Push the top post of the desired insert into hole under top section of bridge
4)
Replace green nozzle
Note: 180°, 90° and Strip Spray inserts are stationary and do not spin.
1
2
3
4
