background image

Model 600C 

Radio Remote Control Handset

INSTRUCTION MANUAL

The 600 Series remote control handset and controller is a wireless system comprised of a
mobile, battery operated remote handset commanding numerous controllers. Operating
range between the remote control handset and the controllers is up to 300' line of sight.

Remote Handset Features

• Remote handset with selector is user friendly and easily operated

• Large liquid crystal display

• 4 optional languages: English, Spanish, Italian and French

• Operates numerous controllers

• The remote stores the memory of up to 50 controllers

• Weekly or cyclic irrigation programs for an 

individual valve or a group of valves

• A fertilization program available for each valve 

separately

• Optional change of the irrigation duration in

percentage (water budgeting)

• Rain Off from 1-99 days

• 8 start times per day for each program 

or individual valve

• Irrigation duration from 1 minute up to 9 hours

• An irrigation cycle from once a day up to 

every 30 days

• Option for manual computerized operation of 

each separate valve or a group of valves

• Powered by 4, AA (1.5-volt) batteries

• Permanent memory

600C_inst  8/3/06  7:45 PM  Page 1

Summary of Contents for 600C












Reviews: