Dipl. Ing. K. Dietzel GmbH
Leedenstraße 10
04626 Beerwalde
Phone: +49 (36602) 140-0
Mail: [email protected]
www.dietzel-hydraulik.de
Page 4 of 4
Revised as of: 03/2014
Nicky Groß
Storage/Maintenance/Care
Store the assembled hose safety devices sorted in a dry place. Individual parts may not be
exchanged.
The hose safety catch itself is maintenance-free. When used in machines, test bays etc., where
increased oscillation, vibration or pulsation of the hose can be expected, the hose safety catch
must be checked at regular intervals (e.g. with machine maintenance work) to ensure the hose
clamp is secure and does not have any damage.
In case of damage to individual parts, the entire hose safety catch must be replaced. The
same applies when the safety catch comes into action after the failure of a hose
connection.
EC conformity declaration for machines (directive 2006/42/EC)
The manufacturer hereby declares…
Dipl. Ing. K. Dietzel GmbH, Leedenstraße 10, 04626 Beerwalde,
That the safety device…
for the holding of a hose in case of failure “Hose Safety Catch” of type SD-XXXX1-XXX2-SLXXXX3
und SF-XXXX1-XXX2-SLXXXX3
1 Clamping range of the hose clamp
2 Diameter of hole in the bracket
3 Wire length
conforms to the provisions of the above directive.
The following harmonised standards have been applied:
DIN EN ISO 12100, Teil 1 und 2……………….Safety of machinery – basic terms
DIN EN ISO 14121-1……………………………Safety of machines – risk evaluation
