9
EN
EN
FR
IT
NL
3
COMMISSIONING THE PRODUCT
3 COMMISSIONING THE PRODUCT
3.4
Assembly TOMTAR DS
1.
Place the seat with the underside pointing
upwards on a clean, fl at and stable surface
(fl oor or table) (Fig. 2).
2.
For mounting the telescopic legs, they are
arranged crossed on the underside of the
seat. The telescopic leg numbered 1 is placed
at the bottom (Fig. 2, 1) and the telescopic
leg numbered 2 (Fig. 2, 2) is placed above
it and fi xed in the centre (Fig. 2, 3). Use the
following parts for this:
1 × washer, 1 × screw 40 mm.
3.
The next step is to bring the holes of the
telescopic legs and those of the backrest
tubes into alignment and screw all compo-
nents to the seat surface (Fig. 3, 1). Use the
following parts for this:
4 × washers, 4 × screws 60 mm.
4.
For mounting the backrest, bring the holes
of the backrest and the backrest tubes
into alignment and screw the components
together (Fig. 4, 1).
Use the following parts for this:
4 × washers, 4 × screws 35 mm.
WARNING
Risk of trapping:
Be careful with your hands/
fi ngers during assembly.
1
Abb. 3
1
Abb. 4
