11
EN
EN
FR
IT
NL
4 USING THE PRODUCT
5
TECHNICAL DATA
NOTE
All dimensions taken on textile parts (e.g. back
upholstery) are to be understood with a toler
-
ance of +/– 10 cm.
Abb. 7
Abb. 8
5.1 DIETZ’S MEASUREMENT SYSTEM
The dimensions given here refer to the standard
configuration of the product.
4.5
ACCESSORIES AND ADD-ONS FROM EXTERNAL SUPPLIERS
There are no accessories available from DIETZ
for this product. Generally, only original accesso
-
ries from DIETZ GmbH are permitted to be used.
If third-party products are installed on the prod
-
uct, responsibility for the safety of the product
passes to the person who installs the accesso-
ries or carries out the installation. A new decla-
ration of the compliance of the combination of
accessories or add-on and product is then to be
made by the person who attaches it. The compli-
ance declared by DIETZ according to MDR
2017/745, Annex I-III shall expire.
WARNING
Safety hazard:
Should add-ons or accessories
that are not sold by DIETZ be used, the safety of
the product cannot be guaranteed.
If accessories or add-ons are added to the prod
-
uct, then the safety instructions in the operating
instructions for the accessories or add-ons must
be observed.
