manualshive.com logo in svg

Dietz CANEO_XL, Operating Instructions Manual

Share
Download
Dietz CANEO_XL Operating Instructions Manual Download Page 28

28

DIETZ GmbH  / Operating instructions / Folding wheelchair for heavy loads CANEO_XL  /  Version 2.0.0 EN

05 ADJUSTMENTS FOR INDIVIDUAL SETTINGS

5.1  Locking brake

The distance between the brake pin and tyre 
casing must be 12 – 14 mm at the narrowest 
point when the brake is fully open.

Loosen the bolt to adjust / correct the distance 
if necessary. Then push the brakes to the cor-
rect position. Subsequently retighten the bolt 
and check the function of the brake. 

If the wheelbase is changed (chapter 5.5), it 
may be necessary to remove the bolt comple-
tely and install the brake in a recess further 
forwards or to the rear.

CAUTION

Brake adjustment should be 
carried out by trained specialists. 
If you have sufficient experience, 
however, you may also carry this 
work out yourself.

Incorrectly adjusted brakes may 
have life-threatening consequences.

05 ADJUSTMENTS FOR INDIVIDUAL SETTINGS

Summary of Contents for CANEO_XL













































Reviews:

No comments

Brands by name

Popular brands

Load more brands