14
15
DIETZ GmbH / Operating instructions standard wheelchair CANEO_B / Version 2.0.1. EN
3.4 Foot plates
Fold the foot plates down.
03 PUTTING INTO OPERATION
3.5 Removing and connecting the rear
wheels
In some situations it is helpful to remove the
rear wheels.
Press the button on the quick-release axle and
hold the hub with four fingers. Then pull the
rear wheel out of the axle mounting.
To connect the rear wheels, press the quick-re-
lease axle button with your thumb again. Now
insert the axle into the axle mounting; the
quick-release axle will engage automatically.
NOTE
Push the quick-release button
while engaging the wheels. The
axle / wheel will engage a lot
easier.
ATTENTION
After connecting the wheels
make sure that the quick-release
axles are engaged properly.
03 PUTTING INTO OPERATION
