3
Designed and developed by Bravat/Dietsche Germany
2
Designed and developed by Bravat/Dietsche Germany 15121302 15121302
A
INSTALLATION DIMENSION
Unit:mm
B
HELPFUL TOOLS
Before installing the new mixer, it is essential that you thoroughly flush through the supply pipes in order to remove any remaining swarf,
solder or other impurities. Failure to carry out this simple procedure could cause problems or damage to the workings of the mixer.
Work water pressure
:
0.5-5kgf/cm² (Including cold and hot).
If the pictures and statements in the ‘Installation Specifications’ is unconfirmed with practicality, please take practicality as standard.
！
Points for attention before installation
INSTALLATION STEP
C
Spanner
Teflo tape
Screwdriver
Flashlight
Tape Measure
Impact Drill
Pencil
2
3
1
4
6
5
8
7
Finished
Hot
Cold
Mounting Hole
Rotate Diverter
Shower
Spout
Close
Open
Hot
Cold
D
FAUCET OPERATION
