•
14
•
PROBLEM
POSSIBLE CAUSE
REASON/SOLUTION
The jump starter won’t
power my 12v device.
The 12v device is not
turned on.
The jump starter battery is
not charged.
The 12v device draws more
than 15A or has a short
circuit
Turn on the 12v device.
Check the battery charge
status by pressing the
button on the front of the
jump starter. See dIgITAL
dISPLAY FUNCTIONS
section of this manual.
disconnect the 12v device.
The internal breaker will
automatically reset after a
minute or two. Try the 12v
device again. If it happens
again, replace the 12v
device.
The battery in the jump
starter won’t hold a charge.
The battery is bad (will not
accept a charge).
Have the battery checked.
The jump starter alarm is
on.
Connections are reversed.
disconnect the jump starter
and reverse the clips.
SPECIfICATIONS
12.
Internal Battery Type
Maintenance-free AgM Lead-acid
Nominal voltage
12v dC
Capacity
22 Ah
DC Power Outlet (Max. Continuous Load)
15A (both outlets combined)
Built-in Work Light (Non-replaceable)
Two, 5w/12v dC
(Base type BA9S)
Jumper Cables
4-gauge AWg, 24 Inches
Dimensions (H x W x D)
12 H x 11.5 x 10.5 Inches
Product Weight
24.5 lbs.
AC Power Specifications
Maximum Continuous Power
400 Watts
Surge Capacity (Peak Power)
800 Watts
No Load Current draw
<0.3 Amps
Wave Form
Modified Sine Wave
Input voltage Range
10.5 - 15.5v dC
AC Outlets
Two, 120v AC 3-Prong NEMA 5-15
REPLACEMENT PARTS/ACCESSORIES
13.
Air Compressor Accessory Kit (3 Hose Adaptors) --------------------00-99-000599
Inflator Accessory Kit: (Inflator / Deflator Hose, Unit End and 3 Hose Adaptors)
--------------------------------------------------------------------------------------00-99-000598
Male-to-Male Accessory 12v Charging Connector ----------------------- 94500109
Summary of Contents for Portable Power 1150
Page 2: ......
