• 5 •
Transformerless Battery Chargers.
9.
Doing so, may cause the device to run warmer or overheat.
cONNEcTINg INvERTER cABLES
4.
The inverter and power source must be in the OFF mode.
Make sure you connect your inverter to a 12-volt power supply only.
Inverter connection:
Decide whether you want to use the 12 volt power plug (100 watts
1.
maximum) or the battery clamps (full inverter capacity).
Locate the positive and negative plastic terminals located on the back of
2.
the inverter and remove the terminal caps completely.
Install the positive (red) cable ring lug onto the positive (red) terminal screw.
3.
Install the negative (black) cable ring lug onto the negative (black) terminal
screw. Tighten each terminal so that the cable cannot come loose.
connecting inverter cable to a vehicle (100 watts maximum):
DC Outlet
DC Plug
Remove the cigarette lighter from its outlet.
1.
Push the 12-volt power plug firmly into the outlet.
2.
Summary of Contents for 28.71494
Page 2: ......