8
8
Initial setup
8.1
8.1
Unpacking and checking the delivery unit
Unpack the parts and check to see whether the delivery matches the information on the delivery note.
The delivery comprises the respective screen module. Data cables, necessary for operation, can be or-
dered separately. If damage has occurred during shipping or if the package contents do not match the
delivery note, immediately inform your Diebold Nixdorf sales outlet.
Transport the device only in its original packaging (to protect it against impact and shock).
8.2
8.2
lnstalling the display to a stand
Take the stand and the monitor out of the packaging. For installation you will need a Torx screwdriver to
loosen and tighten the screws!
8.2.1
8.2.1
Preparing the stand
From the stand:
1.
Remove the VESA cover.
NOTE
*Observe the safety precaution mentioned on the next page when you remove the back
cover of stand.
WARNING
To avoid damage to the back cover of the stand, be careful of how you would remove it.
Copyright © 2020, Diebold Nixdorf
01750342842C
8-1
