DIEBOLD NIXDORF BEETLE/iSCAN EASY eXpress+, Integration Manual, Page: 37 / 45

BEETLE /iSCAN EASY eXpress
+
Integration Guide
33
9.9 Installing the signal indicator
1. Screw in two M4x6 round head
screws halfway into the lower two
drill holes on the rear of the pillar.
2. Place the base plate on the two
screws and slide the base down to
the floor [1]. Now tighten the screws
[2].
3. Insert the rear panel and secure with
a safety screw.
4. Insert the mounting bracket through
the upper opening in the rear panel
and screw tightly using two M4x6
round head screws.
1
2 2