
Manufacturer´s Certification
1.7
1.7
Safety Notes
The BEETLE A1150 conforms to the current safety standards for data processing equipment.
•
If this device is taken from a cold environment into the operating room, moisture condensation may
form. The device must be absolutely dry before being put into service; an acclimatization period of at
least two hours must therefore be observed.
•
This device is equipped with a safety-tested power cable and may be connected only to a prescribed
grounded-contact power socket.
•
When setting up the device, ensure that the power socket on the device and the grounded-contact
power socket are easily accessible.
•
Whenever work of any kind is done on the device, as well as when data cables are plugged and/or
unplugged, the device must be completely disconnected from the line voltage. To do so, turn the de-
vice off and unplug the power cord.
•
To disconnect the device from the supply voltage completely, switch off the device and disconnect
the power plug of the system.
•
Never plug in or unplug data communication lines during thunderstorms.
•
Protect devices from vibrations, dust, moisture and heat.
•
Always dispose of used parts, such as batteries, in an environmentally safe manner.
•
In emergencies (e.g. damaged housing or damaged power cable, penetration by liquids or foreign
bodies), the device must be switched off immediately, the power plug disconnected and the Cus-
tomer Service of Diebold Nixdorf or your dealer must be notified.
•
Your BEETLE A1150 system is the result of modern technical innovation. So please see for accord-
ing structural and technical surroundings to guarantee a faultless and efficient work of your
BEETLE A1150. Therefore, you should connect your BEETLE A1150, or other IT-devices only to
power supply systems with separately guided protective earth conductor (PE). This kind of electricity
system is known as TN-S network. Do not use PEN conductors!
•
Please also observe the recommendations of the norm DIN VDE 0100, Part 540, Appendix C2 as
well as EN50174-2, §5.4.3.Thus you can help to avoid possible malfunctions.
•
If you replace a storage medium, make sure that you only use the storage medium recommended or
approved by Diebold Nixdorf.
•
This equipment is not suitable for use in locations where children are likely to be present.
•
"CAUTION: Risk of Explosion if Battery is replaced by an Incorrect Type. Dispose of Used Batteries
According to the Instructions."/“ATTENTION: Risque d’explosion si la batterie est remplacée par un
type incorrect. Mettre au rebus les batteries usagées selon les instructions.“
Copyright © 2020, Diebold Nixdorf
01750342843A
1-6