© DICTATOR Technik GmbH • Gutenbergstr. 9 • 86356 Neusäß • Germany
Tel. +49(0)821-24673-0 • Fax +49(0)821-24673-90 • E-mail [email protected] • 1043
Page 02.057.07
Technical Manual
DICTAMAT 50 KP
25 N
0,5
1
1,5
2
0
0
50
100
150
200
U/min
Nm
LD50-2
LD50
D) Adjustment of the Closing Force and Speed
(cont.)
2) Adjustment of the
Closing Speed
In order to adjust the closing speed open the door completely.
Now adjust the closing speed during the closing of the door by turning
the adjustment screw of the radial damper (Allan key 5.5 mm or slotted
screw driver) (see ill. 7).
Turning clockwise:
reduces the closing speed
Turning anticlockwise:
increases the closing speed
Now make sure that the spring closes the door from every position, also
the not completely opened door. If necessary increase the pretension
(see point 1.
IMPORTANT
: Pretension the spring only when the door
is completely opened!)
Adjustment screw for
the closing speed
Damping Force
Ill. 11a
Ill. 7
Ill. 8
Maximum adjustment LD50
Minimum adjustment LD50-2
