06 Extended Functions Menu
The Extended Functions Menu has another sub-menu showing several
statistical values.
There are two types of value-counters, either resettable to zero or not.
The following statistical values are stored:
- Cycles
Number of puffs. The counter can be reset to 0.
- Time
The timespan during which power was applied to the coil,
i.e. vaping time.The counter can be reset to 0.
- TotCycl
“Total Cycles” is the number of puffs throughout the entire
mod’s life. It cannot be reset.
- TotTime “Total Time” is the total time of vaping (not stand by) in
a format HHHH:MM that is 4 digits of hours and 2 for minutes.
It cannot be reset.
The menu item
, i.e the resetting of the counters, is intentionally positioned
between resettable counters and those which cannot be reset. So it is easier to remember,
which are reset.
Reset Cntr
Additional Explanation to several menu items, page 3
With “Set Defaults” it is possible to reset all settings to the delivery status.
The reset is initiated by selecting the menu and pressing a button. To avoid
unintended resetting the user has to confirm the procedure by again pressing
Most of the defaults are listed in the overview diagram of the Extended Functions Menu.
Those settings missing there are:
Power:
Temperature:
Heater Control Mode:
Wire Type:
10W
210°C
0 (Power, normal VW)
NiFe (320)
the button when “confirm” is displayed. “Process” shows that the reset is performed.
The statistic counters are saved whenever the mod is automatically or manually switched off.
In contrast, if the battery is removed from the mod before switching off, the changes of the
counters since the last switching on are lost.
Charging the device
The device has two charging options:
The recommended charging mode is to use the built in USB-C connection to a readily available (wall-)
power-supply with USB-A output, with a minimum output current of 2Amps. Note that the USB-C port
on the Dani Box Micro is a charge only port.
The second option is to use the charging contact with the use of the CS1 charge station by dicodes.
The charge current of the CS1 depends on the contact resistance between device and station is typically
1A (2A maximum, limited by the CS1).
Summary of Contents for Dani Box Micro
Page 1: ......
