account).
b.
If you need to connect additional loggers to your network, click “Configure Additional Loggers”
and repeat steps 5-7
c.
If you don’t plan to connect any more DWE loggers, you are done with the Widget on PC screen.
Press the “Exit” button and unplug USB cable from DWE logger.
d.
When you are ready to connect the new DWE(s) to DicksonOne cloud, continue to “Connecting
to DicksonOne” instructions below.
Connect to Your Network - Ethernet
1.
If you followed steps 1-3 above under “Getting Started” and the device is powered on, plug ethernet cable
into the device and an active ethernet jack.
2.
A 6-
digit code will appear on the logger’s screen; save this as it will be used to link the device to your
account. See below for connecting logger to DicksonOne.
3.
Unplug USB cable. Repeat for additional loggers.
Connecting to DicksonOne
1. Visit
dicksonone.com/login
or click on Login at the top right corner. If you have an account,
please sign in. If new to DicksonOne click on blue button “Sign Up For An Account” and follow
on-screen instructions.
2. Once logged into DicksonOne, you will be on the following homepage
.
3. You must activate your subscription to unlock all features
a. The system will work without a subscription, but you will not be able to use alarms,
reports, or store data beyond 30 days. If you have not purchased a subscription, skip to
step 6
b. Click on the first blue box labeled “Activate Your Subscription” or head to
Manage>Billing.
