32
External
Equipment Connection
External
Equipment Connection
You can connect additional equipment, such as VCRs, camcorders etc. to your set.
Examples are shown below.
COMPONENT IN
1 Use a component video cable to connect the DVD player’s
Y/Pb/Pr jacks to the TV’s Y/Pb(Cb)/Pr(Cr) jacks.
2 Use an audio cable to connect the DVD player’s Audio OUT
jacks to the TV’s Audio IN jacks. Be sure to use the upper
side of inputs that you used for the video connection.
3 Use the TV/AV button to select COMPONENT mode.
SCART 1(AV 1) IN
1 Connect the A/V out jacks on the AV device to SCART
jack on the TV.
2 Use the TV/AV button to select SCART1 mode.
3 Press the PLAY button on the VCR.
The VCR playback picture appears on the TV screen.
SCART 2(AV 2) IN
1 Connect the AV out jacks on the AV device to the
SCART 2 on the TV.
2 Use the TV/AV button to select SCART2 mode.
3 Press the PLAY button on the DVD.
Antenna connection
Connect RF out on the VCR to the Antenna input on the rear of
the TV.
In Scart 1 jack, TV out is available.
Note
In Scart 2 jack, selectable A/V out is available.
Note
The Y/Pb/Pr jacks on your DVD player are sometimes
labeled Y/Cb/Cr or Y/B-Y/R-Y. If so, connect the cables to
like colors.
Note
