ENGLISH
22
9
Controls
→
→
Battery installation
u
Inserting batteries
1. Remove the battery cover by pulling it
upward in the direction shown by the arrow.
2. Insert the batteries with correct polarity
3. Replace the battery compartment cover.
- Install two high-quality 1.5V "AAA" alkaline batteries. Don't mix old batteries with
new batteries.
- Remove batteries when you won't use the remote controller for a long time. Liquid
leakage from old batteries may cause operation failure.
u
Notes for using remote controller
• Make sure there are no objects between the remote controller and its sensor.
• Don't place the remote control near a heater or in damp place. Strong impact to the
remote control may cause operation failure.
• Signal from the remote control may be disturbed by sun light or other bright light. In
this case, darken the room or move the TV.
14. PICTURE( )
Recalls your preferred picture setting
15. SOUND( )
Recalls your preferred sound setting
16. ARC( )
You can watch TV in various picture formats;
Auto,
16:9, 14:9, 4:3, 16:9 Zoom, 14:9 Zoom, 4:3 Zoom.
Repeatedly press the
ARC
button to select your
desired picture format.
Note.
16:9 and 4:3 in PC mode are available.
17. TELETEXT buttons
These buttons are used for Teletext.
For further details, see the ‘Teletext’ section.
18. INPUT( )
Selects the AV source of sub picture in PIP mode.
19. PIP( )
Displays a PIP(Picture In Picture) screen.
20. POSITION( )
Selects a position of PIP screen.
21. SWAP( )
Switches a main picture to sub picture in PIP mode.
22. MODE( )
Selects a PIP screen mode. – 16:1, 9:1 and 3:1 mode.
23. PIP PR
x
/PIP PR
y
Selects a programme when RF signal is displayed in
PIP mode.
24.
Ïq
Adjusts menu settings.