9
10
Start cleaning
●
Press the START button on the vacuum
cleaner or the ON/OFF button on the
remote control to start cleaning.
●
Before starting cleaning, make sure the
vacuum is not in sleeping mode. If yes,
press the START or ON/OFF button to wake
it up.
●
The START button doesn’t have light in
sleeping mode. It turns yellow in standby
mode and turns green when working.
Product Operation
Stop cleaning
●
When the vacuum cleaner is working, press the START or ON/OFF button to stop it.
●
After stopping it, the START button will turn yellow. And it will turn to sleeping
mode if there is no operation in 30 seconds.
Sleeping
●
When in sleeping mode, press the START or ON/OFF button can wake it up.
●
When in standby mode, long press the START button to turn to sleeping mode.
●
When in standby mode, the vacuum will turn to sleeping mode if there is no
operation in 30 seconds.
Product Operation
●
Cleaning Modes
Cleaning paths
●
This vacuum has several cleaning paths, which can automatically switch according
to different surface types.
●
The default mode when starting the vacuum is Auto mode. And it will switch the 4
cleaning paths automatically depending on different floor types.
Spot cleaning
●
In standby mode, press the button on the remote control and the vacuum will
turn to spot cleaning mode.
●
This mode is suitable for cleaning at a dirtier area. The vacuum will spiral intensively
until it finishes cleaning the dirty spot.
Scheduling
●
In standby mode, press the PLAN button to set the scheduling time
Once scheduled, the vacuum will clean at a certain time 7 days a week.
Recharging
●
When the battery is low, press the button on the vacuum or the button on
the remote control to make it go for recharging.
●
When it is working and the battery is low, the vacuum will automatically go back to
the charging base for recharging.
Auto cleaning path
Zig-zag cleaning path
Edge cleaning path
V cleaning path