Diamondview DV100UM, User Manual

Page: 33 / 60

33
Unlocking and Enabling the LAN Port
Ethernet Board Settings – Web service can configure the device by opening
the browser and connecting via Web GUI directly.
1. Login – Use Web browser to configure the Ethernet board and connect
via the IP of the display. Once you connect the Login window will popup.
a. Default IP is 192.168.2.1
b. username is “admin”
c. password is the displays serial number
2. Information page provides display information
a. Serial Number
b. Model
c. Ethernet Board Firmware version
3. Network configuration – In
this page you can perform the
following:
a. Network parameters (IP
Address, DHCP, Static, Subnet
Mask, Gateway and DNS)
b. Admin Setup to configure the
Name and Password for Login
c. IP Command will allow you
to enable or dis able the “IP
Command”