Maintenance
Maintenance Cont'd
Troubleshooting
All Diamondback Fitness products are
engineered for years of near-silent operation.
Let noise be your first indication that a repair
or adjustment is required. Please, discontinue
use immediately and contact customer support
or Diamondback Fitness Dealer if an unusual
noise, scraping, knocking, grinding or vibration
is detected. Often, a minor issue will become a
major repair if ignored and use is continued.
Prior to each workout, confirm that all
adjustment levers and screws are tightened.
Tighten the crank arms once per month. Loose
crank arms will become damaged and are not
covered under the warranty.
Your Diamondback Fitness product is
manufactured of the most durable materials
available. The plastics are molded of strong and
chemical-resistant ABS and PVC. The frame is
produced of high-tensile steel and protected
with an industrial-grade, powder paint coating
for the highest level of corrosion resistance. It is
important to note however, that perspiration can
be extremely corrosive if allowed to accumulate
on the machine. After training, always wipe
down the unit with a mild soap solution followed
Please do the following calibration if you
suspect calories, distance, rpms, and watts are
not being tracked accurately.
1. Make sure the resistance lever is at the
lowest position.
2. Press the keys “UP & DOWN” at the same
time until level 1 shows on the display.
3. Press the key “UP” until level 16 shows on
the display, then adjust the resistance lever to
the highest position.
4. Finally, press the key “ENTER.RESET”.
Warranty Information
Diamondback Fitness warrants this unit to be
free from defects in material and workmanship
under normal use in the home environment.
Diamondback Fitness’s obligation under this
warranty is limited to the repair or replacement
of any defective part, provided free of charge.
This warranty is extended to the original
purchaser. The following conditions apply:
Who is Covered
The warranty is extended to the individual
whose name appears on the original sales
receipt and may not be transferred to any other
individual or legal entity.
To Obtain Service
To obtain service, you must contact
Diamondback Fitness customer support at
support@diamondbackfitness.com
Proof of Purchase
Proof of purchase from a Diamondback Fitness
Authorized Dealer or Diamondbackfitness.com
will be required.
What is Covered – For Interior Residential Use
Only.
Note: If proof of purchase cannot be
confirmed, the Warranty’s coverage period
will begin on the date six (6) months after the
date of manufacture.
by a thorough drying with a clean towel.
Positioning a small spray bottle and towel near
the unit will help ensure that your Diamondback
Fitness equipment looks new for many years.
Note: Perspiration is very corrosive and
if allowed to remain on the machine, will
cause discoloration, fading, rust and odors.
Unfortunately, these conditions are not
covered under the Warranty Policy.
1260Sc Owner's Manual
11
