28
1180 E
r
Owner’s Manual
1180 E
r
Owner’s Manual
29
Workout Programs (continued)
Workout Programs (continued)
Getting Started
The Interval program helps to build the strength of your cardiovascular system. By alter-
nating the workload from high to low, your heart gets an effective workout. The LED pro-
file displaying on the dot matrix window represents intensity level for each segment.
Beginning the Program
During idle mode, the message window displays a message “SELECT A PROGRAM”.
Press “INTERVAL” key to enter this program. Its program LED indicator will light up.
Accepting default values or Entering the program setup mode
When the INTERVAL key is pressed, the message window will scroll a message “PRESS
ENTER TO ADJUST OR START TO BEGIN” and wait for an instruction.
•
Press “START” key to accept current default values and begin Interval program
workout.
• Default Time = 30 minutes
• Default Intensity level = a preset intensity profile with default Intensity
level = L1.
•
Or press “ENTER” to enter program setup mode. The message display will take
you through the program setup mode step by step as below: (same as Random
program setup)
• Enter Age
• Enter Weight
• Enter Time
• Enter Intensity level
Note: you may press START key at anytime during this program setting to skip
the adjustment and begin workout. By doing so, the console will use default value
of age and weight for calculations.
During the Program
Display
•
Once the program is started, the message display will turn into workout data
display and display four default data: time, level, calories & strides/min.
•
Press “SELECT” button next to the data display window to select your desired
data display.
•
If no pulse is detected, the Pulse display will show “P” until there is a pulse.
Adjustment
•
User may press “UP/DOWN” key to adjust the intensity level during anytime of
the program.
•
Each time, the “UP/DOWN” key is pressed, it will adjust the intensity level of
that individual segment and the dot matrix window will update the intensity pro
file accordingly.
Pause, Reset, Switch or Save a program
•
See Console Operating Tips section for details, page 16.
Ending the Program
•
When selected program time is up, there will be a beep to signifying the end
of this program.
•
If no pulse is detected, the Pulse display will show “P” until there is a pulse.
Adjustment
•
User may press “UP/DOWN” key to adjust the intensity level during anytime of
the program.
•
Each time, the “UP/DOWN” key is pressed, it will adjust the intensity level of
that individual segment and the dot matrix window will update the intensity pro
file accordingly.
Pause, Reset, Switch or Save a program
•
See Console Operating Tips section for details, page 16.
Ending the Program
•
When selected program time is up, there will be a beep to signifying the end
of this program.
•
The message display will scroll a message “PROGRAM END, TOTAL TIME,
DISTANCE CALORIES ARE:” then the total workout data of ‘Time, Distance and
Calories” will be displayed for 5 seconds.
•
After 5 seconds, it will scroll a message “SAVE YOUR PROGRAM OR PRESS
START TO RE-START”. User may stop, re-start, save this program or enter
another program during this period of time, see below for details.
•
If no key is pressed, it will resume back to scroll a message “PROGRAM
ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” This sequence will be
repeated for 30 seconds and the console will be reset.
Stop this program
To stop this program, simply press “STOP” key once or stop pedaling. The console
will be reset to idle mode. No workout data will be saved for next workout.
Re-start this program
To re-start this program, press “START” key once during this 30 seconds period. This
program will be re-started. Time, distance and calories will be continued
accumulating.
Save this program
•
To save this program, see Console Operating Tips section for details
•
After this program is saved, the message window will resume to display:
“PROGRAM ENDED, TOTAL TIME, DISTANCE, CALORIES ARE:” until another
key is pressed or 30 seconds is up.
Enter another program
User may enter another program during program ending by pressing another
program key, see Console Operating Tips section for details.
Interval
Program Key
