12
1.8.2 - Protection of meat grinder plates with holes greater than
or equal to 8mm
When the customer requires the ability to use plates with holes greater than or
equal to 8 mm, by law it is required to provide a guard (1) to be inserted in the feed
so that the hand of the operator cannot touch it. The guard is attached on two sup-
port pins (2) so that the magnet comes into contact with the sensor inside the ma-
chine, which otherwise will not start.
2
1
Fig. 1.8.3
13
E
ngl
is
h
1.9 – Work position
The correct work position that the operator
must occupy to optimize the operation with the
machine is shown in Fig. 1.9.1.
2 - Specifications
2.1 - Main parts
To facilitate understanding of the manual the main components of the machine are
listed below and shown in fig. 2.1.1.
Fig. 1.9.1
1
2
3
4
5
6
7
Fig. 2.1.1
1. Pestle
2. Feed release handle
3. Machine controls
4. Feet
5. Output feed of ground meat
6. Loading hopper
7. Loading feed
