4
CHAP.1 - INFORMATION ABOUT THE MACHINE
1.1 - GENERAL PRECAUTIONS
The DISPLAY CASE should only be used by trained personnel who
should be fully familiar with the safety regulations set forth in this
manual.
In case of turnover in personnel, the new user should be trained before
using the machine.
Although the machine is equipped with safety mechanisms,
do not
touch heating elements.
Before cleaning or performing maintenance, unplug the machine from
the power supply.
When performing maintenance or cleaning the machine (after removing
the guards), pay particular attention to the residual hazards.
When performing maintenance or cleaning the machine, concentrate
on what you are doing.
Periodically check the conditions of the power supply cable; a worn or
damaged cable is a serious electrical hazard.
If the machine gives the impression or clear evidence of
malfunctioning, do not use it and call the "Service Center".
Do not use the DISPLAY CASE for anything other than food products.
Do not attempt any repairs yourself-always contact authorized repair
shops.
The manufacturer cannot be held responsible for the following
situations:
if the appliance or safety devices are tampered with by unauthorised
personnel
if
non original
spare parts are used;
if the instructions given in this manual are
not carefully and correctly
followed or respected;
if unsuitable cleaning products are used to clean the appliance.
1.2 - SAFETY DEVICES INSTALLED ON THE MACHINE
The safety devices against hazards of an electrical and mechanical nature
have been installed in conformity with
EN 60335 - 1
and
CEE 2006/42
regulations.
The DISPLAY CASE is there fore equipped with safety devices for
electrical and mechanical protection both when operating and during
cleaning and maintenance.
There are, however, some
"RESIDUAL RISKS"
that cannot be completely
eliminated, indicated in this manual under the heading
"CAUTION"
, that
