Diamond KCGD1/AS Manual Download Page 9

VI.   MAINTENANCE 

 
1. Cleaning 
 

Disconnect from the electricity supply  the hodd before carrying out any cleaning or maintenance.

 

 
ATTENTION: do not use jets of water, either direct or under pressure, for cleaning the oven! 

 
Periodically clean the filters on the front side of the hood

 

without using substances that are harmful to 

health.  
Clean the exterior with a dry cloth, avoiding the use of solvents or products containing abrasive substances 
or chlorates.  
If the hood is not to be used for a long period, disconnect from the electricity supply and wipe the stainless 
steel surfaces with a cloth soaked in Vaseline oil to form a protective film over them. 
 

These recommendations are important for keeping the hood in good condition and failure to  
observe them could result in damage which is not covered by the warranty. 

 

2. 

Location of main components

 

 

 

To replace the control card, remove the panel from the rear of the hood control panel. 
 

Before engaging in any one of these operations disconnect the appliance from the mains.

 

 

 

3. 

Spare parts list

 

 

For spare part identification please refer to the attached enclosure.

 

 
 
 

 
 
 
 
 
 
 

 

GB 

NR CODE 

DESCRIPTION 

4 91310330 Extractor 

fan 

6 91710310 Suction 

pipe 

d.80 

7 91310270 Control 

panel 

8 91611310 Front 

panel 

Summary of Contents for KCGD1/AS











Reviews: