background image

Suggested Settings

The pedal has been designed to give great tone with all four controls at the 12 noon po-

sition.  Here are some other settings that we’ve had fun with....

For that high gain garage band sound. 

Try the mid-boost on or off.

Seemingly endless sustain, much like you 

get with that handy little magnetic string 

vibrating device you can buy.

Ouch.

Gettin Dizzy

E-Violin

Eviscerator

PorkNose

Just in case you ever need the sound of a 

tiny portable amp with gobs of gain, dial 

this setting in...

BassCajones

For fun we tried putting a passive bass 

guitar through it, and it sounds pretty darn 

good. Doesn’t affect the low end much at 

all (at least for a 4-string), yet gives a nice 

fuzz grind. Also cool when you turn on the 

mid-boost for upper register soloing. Out-

�� � �

��� �

� � � � � �

�� �� � �

�� � �

��� �

� � � � � �

�� �� � �

�� � �

��� �

� � � � � �

�� �� � �

�� � �

��� �

� � � � � �

�� �� � �

�� � �

��� �

� � � � � �

�� �� � �

put levels from an active bass are just a tad 

high for a usable effect, unless you really like the sound of square waves.

MidBoost Off

MidBoost Off

MidBoost On/Off

MidBoost On

MidBoost Off

4

Summary of Contents for Fireburst

Page 1: ... and wear appropriate hearing protection when play ing loud Design Features True bypass signal path Footswitchable between thick liquid fuzz and focused mid boosted distortion Premium audio components including 2 polypropylene capacitors and 1 metal film resistors All discrete component distortion and mid boost circuit Active Baxandall bass treble tone control system with audiophile grade op amp Ba...

Page 2: ...overall output volume of the box Once the relative levels of gain and filtering are set this control can be used to adjust overall clean vs effect levels Switches On Off This switches the pedal between bypass and in circuit operation A red LED indicates that the pedal is on The fuzz distortion mode that the pedal switches to when turned on is dependent on the current position of the mid boost switc...

Page 3: ...ck in the con necting wires into the box cavity and replace the back plate with the four screws taking care not to pinch the connecting wires Using a 9V adapter Any standard 9V DC negative pin AC adapter for effect pedals can be used to power the Diamond Drive The insertion of the AC adapter plug automatically removes the internal battery from the circuit Warranty Diamond Pedals carry a full five y...

Page 4: ...Eviscerator PorkNose Just in case you ever need the sound of a tiny portable amp with gobs of gain dial this setting in BassCajones For fun we tried putting a passive bass guitar through it and it sounds pretty darn good Doesn t affect the low end much at all at least for a 4 string yet gives a nice fuzz grind Also cool when you turn on the mid boost for upper register soloing Out put levels from ...

Reviews: