22 / 32
250S-UK1.DOC
6.
PROGRAMMING
The TLS telephone is designed to facilitate programming remotely over a telephone line.
Programming is carried out using sequences keyed from a DTMF telephone, when
connected to the TLS telephone to be programmed.
6.1
PROGRAMMING CODES
IMPORTANT :
Before all programming, key the access code : *1234* (factory setting) or as changed by the
user (see function 12/13 below).
The acceptance sequence is a single beep if memory M0 (see function 18 below) is empty or
a single beep followed by the contents of Memory 0 followed by « * » if memory M0 has
been programmed.
Non-acceptance is indicated by « no-response » in which case it is necessary to try again.
Proceed with programming as follows :
For each programming sequence below the telephone gives an acceptance/non-acceptance
sequence. The acceptance sequence is a mix DTMF tones (functions N° 1, 5 and 18 below) or a
single beep (all other functions).
In all cases the non-acceptance sequence is two beeps.
If the non-acceptance sequence is received, it is necessary to try again.
Summary of Contents for DIA-245
Page 32: ...32 32 250S UK1 DOC...
