Quantum SBC User Manual Rev A
www.diamondsystems.com
Page 53
Response:
Byte
Length
Value and Description
0
2
MESSAGE_SIG: Message signature
2
1
COMMAND_RECEIVER_WATCHDOG_SETTINGS:
Response ID
3
1
0: Indicating no data is sent
4
1
The time value set depending on the following set of values:
Value Time interval
0: 1 sec
1: 2 sec
2: 4 sec
3: 8 sec
4: 16 sec
5: 32 sec
6: 1 min.
7: 2 min.
8: 4 min.
9: 9 min.
10: 17 min.
11: 35 min.
12: 70 min.
13: Disable.
Comments:
The command returns an integer as its response, which represents a timeout value depending on the value-time
interval chart given above.
13.11
MTBF Power Data:
Command:
Byte
Length
Value and Description
0
2
MESSAGE_SIG: Message signature
2
1
COMMAND_MTBF_DATA:
Indicating the command to process
3
1
0: Indicating no data is sent
Response:
Byte
Length
Value and Description
0
2
MESSAGE_SIG: Message signature
2
1
COMMAND_RECEIVER_MTBF_DATA:
Indicating the command to process
3
1
4: Indicating 4 bytes of data
Comments:
This command is similar to the watchdog timeout read command described earlier. It is also 4 bytes long. Only
the command id is different. The response of this command returns the boot up time in seconds.