Aurora User Manual Rev A6
www.diamondsystems.com
Page
31
6.7 Super I/O Configuration
This is to set the address/IRQ of the four serial ports. COM3 and COM4 are capable of RS-232/422/485
protocols; whereas COM1 and COM2 can only be set to RS-232.
6.8 Console Redirection
In the advanced menu, the user can select any of the serial ports for console redirection with different speeds
ranging from 115200bps to 9600bps as follows.
Advanced - Remote Access Configuration
- Disabled (Default)
When set to Enabled, the console re-direction is activated on COM1 by default at 115200,n,8,1 communication
settings. The remote access configuration can be enabled on any of the four COM ports. Baud rates supported
are 115200 (default when enabled), 57600, 38400, 19200 and 9600.
When set to Enabled, the BIOS can be accessed by pressing F4 on the remote keyboard. BBS POPUP can be
accessed by pressing F3 on that remote keyboard.
