27
cutting attachment in
central / side position
NOTE:
The Fast-Cut is delivered with the cutting attachment
mounted in the middle position (
1
). For cutting up against ob-
stacles, such as curbs or walls, the cutting attachment can be
mounted to one side (
2
). Use this position only when actually
necessary, and afterwards return the cutting attachment to the
middle position
In this position the Fast-Cut has better balance, is easier to
guide, and is not as fatiguing for the operator.
Use the combination tool (
8
) to lever out the stop pin (
9
) as
shown in the illustration, until the protective hood (
11
) can be
turned.
NOTE:
The turn stop (
7
) is deactivated when the stop pin (
8
) is
removed. This permits the hood (
11
) to be turned farther than
the turn stop (
7
).
Unscrew the grip (
10
) and turn the protective hood (
11
) as
shown in the illustration.
Disengage the V-belt (
12
) and remove the cutting attach-
ment.
NOTE:
The illustration shows the V-belt for models FC7312
and FC7314).
8
9
10
11
12
Repositioning the cutting attachment
Loosen nuts (
5
).
Loosen the tightening screw (
3
) (counter-clockwise) until the
end of the screw (
4
) is visible in the gap.
Loosen and unscrew the screw (detail
X
, only for SC-
8116XL).
Unscrew the nuts (
5
) and remove the cover (
6
).
Summary of Contents for Fast-Cut FC7312
Page 31: ...31 Notes...
