![background image](http://html1.mh-extra.com/html/diamond-products/cvg1/cvg1_operators-manual_2494333011.webp)
CVG
1 OPERATOR’S MANUAL
Maintenance
General Maintenance
•
Check belt of any burrs or breaks.
•
Check the condition of the main filter.
•
Look for any loose bolts are any damages
on the vacuum.
Engine Maintenance
Refer to engine manual for a detailed
maintenance schedule
•
Clean air filter after every use.
•
Check engine oil before use.
•
Change engine oil after first 20 hours,
every 100 hours after.
Dust Drum Removal and Installation
Drum Removal
1. Have the casters parallel with the frame.
2. Raise the handle so the knobs on the
handle are horizontal.
3. Roll the drum out from underneath the
vacuum.
Drum handle raised
Drum handle lowered
Drum Installation
1. Have casters parallel with the frame
2. Roll the drum underneath the vacuum, with
the knobs horizontal..
3. Guide the drum so that knobs on both sides
go into the lever support.
4. Push the drum until the rear knob touched
the back of the lever support
5. Pull the handle down, so the knobs are
vertical.
Filter Maintenance
•
The filter should be replaced
when the vacuum is performing
poorly and the shake bar is no
longer working efficiently.
Filter Removal
1. Remove lid and lift bracket.
2. Disconnect the plug for the
motor wires.
3. Remove the outer 6 nuts and
remove the filter/motor assembly.
CVG1 with Lid removed
4. Remove the 6 inner nuts, the filter
can now be removed from the
assembly.
Filter Installation
1. Repeat the removal steps, but in
reverse order,
11
Summary of Contents for CVG1
Page 1: ...CORE VAC OPERATOR S MANUAL CVG1 GAS VAC Rev 21 02 Part 1802732 ...
Page 2: ......
Page 15: ......