Diamond Multimedia DS3900, Quick Start Manual

Page: 9 / 21

USB 3.0 Display Dock User’s Manual
6
2. Please wait while Windows configures DisplayLink Core Software. Your screens
may temporarily go black or flash during this process.
3. When finished, the installation screen will disappear and you will return to your
desktop.
Note
：
On some machines you may need to reboot before you can use your Display
dock.
Hardware installation
1.
Connect the
Connect the power adapter to the DS1000 and then to a wall socket. Then plug to a USB 3.0
or 2.0 port on the PC.
USB display dock :
Plug the USB3.0 cable into the USB upstream connector on the back of the Display dock.
Then a pop-up message will appear in the notification area indicating the installation is
complete.
* Actual strings depend on your operation system. These screen shots are from Windows 7
and might vary slightly for each operation system.
2.
Connecting Ethernet network device
1. Connect an Ethernet cable to the Ethernet port on the Display dock.
2. Connect the other end of the Ethernet cable to your network hub, switch or router.
3.
Connecting DVI/HDMI Monitor

For DVI port : Use a DVI cable (not provided) to connect the DVI port to a monitor
equipped with DVI input jack.

For HDMI port : Use a HDMI cable (not provided) to connect the HDMI port to a monitor
equipped with HDMI input jack.
4.
5. Connecting USB2.0/USB3.0 Devices