DisplayLink Core software and DisplayLink Graphics installs.
Note:
The screen may flash or go black during the install.
No message will be shown at the end of the install.
4.
Connect your DisplayLink device via the USB cable to your PC.
A message will be shown that DisplayLink software is configuring itself for first use:
5.
The screen should flash and the DisplayLink device should start to extend the Windows desktop.
Note:
On some machines you may need to reboot before you can use your DisplayLink enabled
device.
Windows 7
The preferred method of installation is using Window 7’s Windows Update facility.
To Install the DisplayLink USB Graphics on Windows 7
1.
Connect your DisplayLink device via the USB cable to your PC.
Windows detects the new hardware and automatically downloads the driver.
2.
Once downloaded, the install will run
The DisplayLink software end user license agreement window opens.