2.4.1. Checking your Firmware Version
To check if your firmware version is up to date, follow the
steps below:
1. Pair your SwingTracker to your iOS device. (
to learn how.)
2. Navigate to the Pair Sensor Page from the main menu of the app.
3. Select the ‘i’ to the far right of your SwingTracker
4. This next page is your Sensor Information, you’ll see an option that says
FIRMWARE VERSION
5. Tap on this option to check if it’s up to date.
If your Sensor’s firmware is up to date, you will get a message saying there is no update available.
If your Sensor’s firmware is not up to date, you will be asked if you’d like to start the firmware update. For
helpful tips and images for performing the update,
Out of date Firmware- Pair Sensor Page
Out of date Firmware- Smart Ball Information Page
If your Firmware Version is out of date, it will appear highlighted in yellow on the Pair
Sensor page or written in red in your Sensor Information page.
*
Diamond Kinetics
SwingTracker - 1
Page 16 of 107
