12
1
POWER
Power Switch
Power On/Off
Blue-Operation mode /
Orange-Power saving mode
2
AUTO
Auto
Adjustment
Button
OSD Off: auto adjustment function.
OSD On: Confirms an OSD
selection.
3/4
S
T
Left Button
Decrease
Button
OSD Off: Press
S
or
T
to directly
adjust the “volume” and brightness.
OSD On: Use these buttons to
adjust the values of a selected
function.
5
SEL/MENU
OSD
Function
Enters / Exits OSD
To Manually adjust the image:
1. Display a test pattern image on the monitor. This is the best way to observe
changes as you adjust the image. Alternatively, a stationary image may be
used, preferably one with small text or thin vertical lines.
2. Open the OSD menu by pressing the
SEL/MENU
button on the monitor.
3. Press
a
or
b
to select the
Image Adjust
menu, then press
AUTO
.
4. Press
a
or
b
to select
Clock
and then press
_
or
`
adjust.
5. Check the current setting. Increase or decrease the
Clock
setting to get
the optimum picture. If some noise or distortion is still visible in the centre
section of the test pattern, select
Phase
and press
AUTO
.
6. Adjust the Phase setting to optimise the displayed image. Close the phase
submenu by pressing
SEL/MENU
.