SYSTEM CONFIGURATIONS
(CHECK BTR MANUAL FOR WIRING)
TURN-ON OPTIONS
- configure the “Turn-On Mode” switch for desired turn-on trigger. There are 3 modes available
on the MICRO series amplifier, REM, DC and VOX. (REM) is the standard 12V trigger wire (DC) or DC offset (when
connected high level in, this will sense differences in ground in your wiring through the speaker leads and turn on amplifier),
VOX (signal sensing) will sense any kind of signal input into the amplifier RCA turning on the amplifier. The most preferred
and reliable method is using the REM setting with a 12V trigger wire connected to the vehicles headunit switch ouput and
will provide instant on and off for the amplifier. VOX and DC will provide turn on capabilities for the amplifier when a 12V
trigger wire is not available. These methods will have some delay in turning the amplifier on and off.
OPTIONAL SOURCE - BLUETOOTH RECEIVER (BTR9/10/12) SETUP
The BTR will pair to your phone (or any selected Bluetooth device) and will allow playback through the amplifier to
speakers giving you unlimited install options. The DAT line of BTR’s have 7 functions - Play, Pause, Volume up/down,
Track up/down, Pairing and Power on/off of Bluetooth audio through this one solution. Once paired, the BTR will auto
pair the last person paired to the controller when it was powered down. The unit will remember up to 9 users and have
memory without battery for up to 30 days.
³6:,7&+('´
92/76
'&³2))6(7´
³92;´92,&(
$&7,9$7('
VLJQDOVHQVLQJ
All Diamond Audio amplifiers work with these Bluetooth receivers:
127(0$.(685(726(7
³78512102'(´725(0
E
ICR
G:LJ
CABLE
LJA??=J:Q9;;=KKGJQ
RED)
NUT
'$6+
5($502817
AUX IN
'$%756+2:1
BTR
MFAN=JK9D9<9HLGJ
AF;DM<=<OAL@9DD<9L:LJK
“FOR MARINE”
DABTR10
“FOR RECREATION”
AUX
DABTR12
“ FOR POWERSPORTS”
DABTR9
10
