Diamond Audio Technology D6 1000.2, Installation Manual

Page: 3 / 12

Frequency Response: 20Hz to 20KHz +/-3 dB
Signal to Noise Ratio:
>
95dBA (20 to 20kHz)
Channel Separation 50dB
THD+N(Total Harmonic Dist Noise)
<
0.2%(Output-1W 4 Ohms)
RCA Input Sensitivity: 150mV to 4V
RCA Input Impedance: > 20K Ohms
Hi-Level Input Sensitivity: 1.5V to 14V
Hi-Level Input Impedance: 32 Ohms
Min to Max Voltage requirements 10.2V to 15.5V DC
High/Low Pass Crossover: 12dB/Oct HP, 24dB/Oct LP
30-500Hz Variable
Crossover Configuration: Switchable (OFF/HP/LP)
Bass EQ 0 to +18dB
@
50Hz (Variable)
D6 450.2
2-Channel Amplifier
450 Watts RMS Output Power
(All Channels Driven):
(Into 4 Ohms) 125w x 2
(Into 2 Ohms) 225w x 2
(Bridged into 4 Ohms) 450w x 1
Frequency Response: 20Hz to 20KHz +/-3 dB
Signal to Noise Ratio:
>
90dBA (20 to 20kHz)
Channel Separation 50dB
THD+N(Total Harmonic Dist Noise) < 0.2%(Output-1W 4 Ohms)
RCA Input Sensitivity: 150mV to 4V
RCA Input Impedance: > 20K Ohms
Hi-Level Input Sensitivity: 1.5V to 14V
Hi-Level Input Impedance: 32 Ohms
Min to Max Voltage requirements 10.2V to 15.5V DC
High/Low Pass Crossover: 12dB/Oct HP, 24dB/Oct LP
30-500Hz Variable
Crossover Configuration: Switchable (OFF/HP/LP)
Bass EQ 0 to +18dB
@
50Hz (Variable)
D6 700.4
4-Channel Amplifier
700 Watts RMS Output Power
(All Channels Driven):
(Into 4 Ohms) 115w x 4
(Into 2 Ohms) 175w x 4
(Bridged into 4 Ohms) 350w x 2
Frequency Response: 20Hz to 250Hz +/-3 dB
Signal to Noise Ratio:
>
70dBA (20 to 20kHz)
THD+N(Total Harmonic Dist Noise)
<
0.2%(Output-1W 4 Ohms)
RCA Input Sensitivity: 150mV to 4V
RCA Input Impedance:
>
20K Ohms
Min to Max Voltage requirements 10.2V to 15.5V DC
Low Pass Crossover: 24dB/Oct, 50-250Hz Variable
Crossover Configuration: Low Pass
Bass EQ 0 to +12dB @ 50Hz (Variable)
D6 1200.1
Mono Amplifier
1200 Watts RMS Output Power
(Single Channel Driven):
(Into 4 Ohms) 450w x 1
(Into 2 Ohms) 800w x 1
(Into 1 Ohms) 1200w x 1
Frequency Response: 20Hz to 20KHz +/-3 dB
Signal to Noise Ratio:
>
95dBA (20 to 20kHz)
Channel Separation 50dB
THD+N(Total Harmonic Dist Noise)
<
0.2%(Output-1W 4 Ohms)
RCA Input Sensitivity: 150mV to 4V
RCA Input Impedance:
>
20K Ohms
Hi-Level Input Sensitivity: 1.5V to 14V
Hi-Level Input Impedance: 32 Ohms
Min to Max Voltage requirements 10.2V to 15.5V DC
High/Low Pass Crossover: 12dB/Oct HP, 24dB/Oct LP
30-500Hz Variable
Crossover Configuration: Switchable (OFF/HP/LP)
Bass EQ 0 to +18dB @ 50Hz (Variable)
D6 1000.2
2-Channel Amplifier
1000 Watts RMS Output Power
(All Channels Driven):
(Into 4 Ohms) 250w x 2
(Into 2 Ohms) 500w x 2
(Bridged into 4 Ohms) 1000w x 1