iv
2
Increase the separation between the equipment and the receiver.
3
Connect the equipment onto an outlet on a circuit different from that to
which the receiver is connected.
4
Consult the dealer or an experienced radio/TV technician for help.
Shielded interconnect cables and a shielded AC power cable must be employed
with this equipment to ensure compliance with the pertinent RF emission limits
governing this device. Changes or modifications not expressly approved by the
system's manufacturer could void the user's authority to operate the equipment.
Declaration of Conformity
This device complies with part 15 of the FCC rules. Operation is subject to the
following conditions:
1
This device may not cause harmful interference, and
2
This device must accept any interference received, including interference
that may cause undesired operation.
FCC Caution
Any changes or modifications not expressly approved by the party responsible
for compliance could void the user's authority to operate this equipment.
The antenna(s) used for this transmitter must not be colocated or operating in
conjunction with any other antenna or transmitter.
Enabling wireless LAN and wireless WAN simultaneously in one computer is not
allowed . While one is in use, the other will be turned off.
Running wireless devices in the aircraft is prohibited. Make sure all wireless
devices in your computer are turned off during the flight.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an
uncontrolled environment. This equipment should be installed and operated with
a minimum distance of 20 cm (8 inches) between the radiator and your body.
FCC Wireless Regulation
Due to the FCC regulations, wireless LAN and wireless WAN modules shall not
work in a machine simultaneously. If these two modules are installed in the V5,
while one is in use, the other will be off automatically by the system.
Battery Caution
Danger of explosion if battery is incorrectly replaced. Replace only with same or