Navigate to: Configuration > Routing Table
, and adjust the following settings -
1.
Select
VoIP Host Groups
radio button.
2.
Enter your
Microsoft
®
Office Communications Server 2007 Mediation Server IP Address
in the
Host list
field.
3.
Click
Submit
to save settings. This will prevent loss of configuration. Do not restart the gateway.
STEP
5
– RESTARTING THE GATEwAy
For the configuration changes to take effect, you will be prompted to restart the gateway. Select the
Restart
menu option through the web interface and proceed to click on
Restart unit Now
.
After restarting the gateway, examine the T1 link in front of the gateway and make sure that the T1 LED is green. If it is yellow or red, please check your cable and gateway T1
configuration or consult with your PBX vendor. Once you have a green LED, you can begin making PSTN to Microsoft
®
Office Communications Server 2007 calls if Normalization
rules were configured for inbound PSTN calls. Microsoft
®
Office Communications Server 2007 to PSTN calls would require more rules to be added.
STEP
6
– CONfIGuRING DIAl PlAN fOR E.164 SuPPORT
Configuring calls from PSTN to Microsoft
®
Office Communications Server 2007
No modifications to the Inbound TDM Rules under the Routing Table are needed if Microsoft
®
Office Communications Server 2007 is configured with Normalization rules for
inbound PSTN calls.
Note
: Microsoft recommends that Normalization Rules be completed within the Microsoft
®
Office Communications Server 2007 configuration. If however, Normalization is not
completed there, then new rules have to be added to the Dialogic
®
2000 Media Gateway Series for calls from the PBX to the Microsoft
®
Office Communications Server 2007
environment. For information on configuring Normalization Rules on the Dialogic
®
2000 Media Gateway Series, refer to:
http://www.dialogic.com/microsoftuc/OCS_DMG2000_setup_6x.pdf
Configuring calls from Microsoft
®
Office Communications Server 2007 to PSTN
Gateway Inbound VoIP Rules need to be added in order to convert E.164 formatted numbers into numbers that can be dialed by the PBX.
Routing Rule Examples can be found in the following documents:
Dialogic
®
Media Gateway Installation and Configuration Note for Microsoft
®
Office Communications Server 2007
http://www.dialogic.com/microsoftuc/OCS_DMG2000_setup_6x.pdf
Dialogic
®
1000 and 2000 Media Gateway user’s Guide
http://www.dialogic.com/manuals/mediagateway/UsersGuide_6x.pdf
Copyright © 2008 Dialogic Corporation. All Rights Reserved. You may not reproduce this document in whole or in part without permission in writing from Dialogic Corporation at the address provided below.
All contents of this document are furnished for informational use only and are subject to change without notice and do not represent a commitment on the part of Dialogic Corporation or its subsidiaries
(“Dialogic”). Reasonable effort is made to ensure the accuracy of the information contained in the document. However, Dialogic does not warrant the accuracy of this information and cannot accept
responsibility for errors, inaccuracies or omissions that may be contained in this document.
INFORMATION IN THIS DOCUMENT IS PROVIDED IN CONNECTION WITH DIALOGIC® PRODUCTS. NO LICENSE, EXPRESS OR IMPLIED, BY ESTOPPEL OR OTHERWISE, TO ANY INTELLECTUAL PROPERTY RIGHTS IS
GRANTED BY THIS DOCUMENT. EXCEPT AS PROVIDED IN A SIGNED AGREEMENT BETWEEN YOU AND DIALOGIC, DIALOGIC ASSUMES NO LIABILITY WHATSOEVER, AND DIALOGIC DISCLAIMS ANY EXPRESS OR
IMPLIED WARRANTY, RELATING TO SALE AND/OR USE OF DIALOGIC PRODUCTS INCLUDING LIABILITY OR WARRANTIES RELATING TO FITNESS FOR A PARTICULAR PURPOSE, MERCHANTABILITY, OR INFRINGEMENT
OF ANY INTELLECTUAL PROPERTY RIGHT OF A THIRD PARTY.
Dialogic products are not intended for use in medical, life saving, life sustaining, critical control or safety systems, or in nuclear facility applications.
Due to differing national regulations and approval requirements, certain Dialogic products may be suitable for use only in specific countries, and thus may not function properly in other countries. You are
responsible for ensuring that your use of such products occurs only in the countries where such use is suitable. For information on specific products, contact Dialogic Corporation at the address indicated
below or on the web at www.dialogic.com.
It is possible that the use or implementation of any one of the concepts, applications, or ideas described in this document, in marketing collateral produced by or on web pages maintained by Dialogic may
infringe one or more patents or other intellectual property rights owned by third parties. Dialogic does not provide any intellectual property licenses with the sale of Dialogic products other than a license
to use such product in accordance with intellectual property owned or validly licensed by Dialogic and no such licenses are provided except pursuant to a signed agreement with Dialogic. More detailed
information about such intellectual property is available from Dialogic’s legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Dialogic encourages all users of its products
to procure all necessary intellectual property licenses required to implement any concepts or applications and does not condone or encourage any intellectual property infringement and disclaims any
responsibility related thereto. These intellectual property licenses may differ from country to country and it is the responsibility of those who develop the concepts or applications to be aware of and
comply with different national license requirements.
Dialogic, Dialogic Pro, Brooktrout, Cantata, SnowShore, Eicon, Eicon Networks, Eiconcard, Diva, SIPcontrol, Diva ISDN, TruFax, Realblocs, Realcomm 100, NetAccess, Instant ISDN, TRXStream, Exnet, Exnet
Connect, EXS, ExchangePlus VSE, Switchkit, N20, Powering The Service-Ready Network, Vantage, Making Innovation Thrive, Connecting People to Information, Connecting to Growth and Shiva, among others
as well as related logos, are either registered trademarks or trademarks of Dialogic. Dialogic’s trademarks may be used publicly only with permission from Dialogic. Such permission may only be granted
by Dialogic’s legal department at 9800 Cavendish Blvd., 5th Floor, Montreal, Quebec, Canada H4M 2V9. Any authorized use of Dialogic’s trademarks will be subject to full respect of the trademark guidelines
published by Dialogic from time to time and any use of Dialogic’s trademarks requires proper acknowledgement.
Microsoft is a registered trademark of Microsoft Corporation in the United States and/or other countries. Other names of actual companies and product mentioned herein are the trademarks of their
respective owners.
Publication Date: August 2008 Document Number: 64-0351-01
08/08 11128-01
Select
VoIP Host Groups
radio button
Enter your
Microsoft
®
Office
Communications Server
2007 Mediation Server IP
Address
in the
Host list
field
