Dialog Semiconductor SMARTBOND TINY DA14531, Hardware User Manual

Page: 8 / 29

UM-B-141
DA14531 SMARTBOND TINY™ MODULE Development
Kit Hardware User Manual
Target
User Manual Revision 1.1 11-05-2020
CFR0012 8 of 29
© 2020 Dialog Semiconductor
11. Power switch (SW4). Selection between VLDO from PRO-MB/ Coin cell battery or USB power
supply. Optional.
12. USB power supply section with OVP circuit. Optional.
13. Jumper header for LED isolation(J5). Optional.
14. General purpose button (SW1). Optional.
15. General purpose LED (D1). Optional.
16. Mating connector on the PCB (J1).
Figure 4: Component description. Bottom side.
The bottom side of the kit provides battery case for a CR2032 coin cell battery. Test points have
been placed for monitoring various signal behaviors and voltage levels of the components. The
marked and numbered sections of the system are:
17. Coin cell battery (BT1)
18. Test points (see Table 1 for more details)
19. Dialog label
Table 1: Test Points Description
Test Point Assigned to Comments
TP1 FIDUCIAL Not electrically connected
TP2 FIDUCIAL Not electrically connected
TP3 GND Ground
TP7 SWCLK JTAG Interface- Clock Signal
TP8 VLED1 Voltage level of RED LED (D1)
TP9 SWDIO JTAG Interface DIO Signal