UM-GP-002
GreenPAK Advanced Development Platform
User Manual
Revision 2.2
21-Feb-2020
CFR0012
20 of 40
© 2020 Dialog Semiconductor
Use the GreenPAK Advanced Development Board to test this project. Connect the GreenPAK
Advanced Development Board to the PC and press “Emulation” button. This will load the code of
your project to the chip and will enable Test functionality of your Development Board.
Figure 17: GreenPAK Designer, Emulation Tool
To test this project we will use the following tools:
▪
Signal generator. Signal generator is applied to V
DD
pin to power GreenPAK chip
▪
Logic generator. Logic generator serves as clock source
▪
Button is a software simulation of the real button. It switches Pin between V
DD
and GND signal
levels
▪
Inverted buffered LED
▪
Buffered LED
Figure 18: Signal Generator Connected to V
DD
Pin
Signal generator is presented as a power source for GreenPAK chip. It's configured to output source
constant 3.3 V.
