Dialog Semiconductor DA16 Series, Getting Started Manual

Page: 67 / 80

UM-WI-056
DA16xxx FreeRTOS Getting Started Guide
User Manual Revision 1.0 27-Oct-2021
CFR0012 67 of 80 © 2021 Dialog Semiconductor
CLI Parameter Description
flush (none)
For every interface (STA, AP), DA16200 deletes the Profile and closes
DA16200 service operation (D)
B.2.4 STA Commands
Table 12: CLI Commands on STA Mode
Command Parameters Description
scan
(none) or
<freq>
Active scanning (Probe Request Broadcast) (D)
For
<freq>
inputs, it is possible to scan APs of a certain frequency
range (MHz) only (option)
For example:
[/DA16200/NET] # cli scan
○
Scans all channels that correspond to the current country setting
disconnect (none)
Disconnect the accessed AP (D)
For example:
[/DA16200/NET] # cli disconnect
○
OK (With no AP being accessed, 'FAIL')
roam
(none) or
<oper>
Roaming On/Off and Roaming status inquiry (A)
<oper>
run: On | stop: Off
Default: Roaming Off
For example:
[/DA16200/NET] # cli roam
○
Roaming=STOP, Threshold=-65
○
Usage: cli roam [run/stop]
For example:
[/DA16200/NET] # cli roam stop
○
Roaming function-off
roam_threshold <value>
Roaming triggering RSSI value (dBm) setting (B)
<value>
: Roaming threshold RSSI (dBm)
Default: -65 (dBm)
For example:
[/DA16200/NET] # cli roam_threshold -85
○
Set the roaming threshold to -85 dBm