UM-WI-056
DA16xxx FreeRTOS Getting Started Guide
User Manual
Revision 1.0
27-Oct-2021
CFR0012
18 of 80
© 2021 Dialog Semiconductor
NOTE
If the transfer does not start within a few seconds, cancel and start again.
c. After the transfer completes, the total size is displayed:
xyzModem - CRC mode, 5(SOH)/91(STX)/0(CAN) PKTs, 8 retries, err:Timed out
## Total Size = 0x000168a0 = 92320 Bytes
[MROM]
NOTE
Ignore the “
err:..
” messages.
d. Repeat steps a. through c. to download the FRTOS firmware image and then the DA14531
firmware image (if using DA16600MOD).
5. Run the firmware:
After all firmware images have been downloaded, run the
boot
command at the
[MROM]
prompt to
start the firmware:
[MROM]
boot
Use the
“boot” command to
start the firmware.
Wakeup source is 0x0
[dpm_init_retmemory] DPM INIT CONFIGURATION(1)
******************************************************
* DA16200 SDK Information
* ---------------------------------------------------
*
* - CPU Type : Cortex-M4 (120MHz)
* - OS Type : FreeRTOS 10.4.3
* - Serial Flash : 4 MB
* - SDK Version : V3.1.3.0 GEN
* - F/W Version : FRTOS-GEN01-01-15129-000000
* - F/W Build Time : Aug 26 2021 22:58:01
* - Boot Index : 0
*
******************************************************
System Mode : Station Only (0)
>>> DA16x Supp Ver2.7 - 2020_07
>>> MAC address (sta0) : d4:3d:39:10:a2:48
>>> sta0 interface add OK
>>> Start STA mode...
[/DA16200] #
6. Reset to factory defaults:
If it is the first time using the EVK or to return the EVK to a clean uninitialized state, run the
factory reset command.
At the
[/DA16200]
prompt, type
factory
to do a factory reset:
[/DA16200] #
factory
Use the “factory” command to do a factory reset.
FACTORY RESET [N/y/?]
Y
Enter Y to perform a factory reset.
Start Factory-Reset ...
Rebooting....
Wakeup source is 0x0
[dpm_init_retmemory] DPM INIT CONFIGURATION(1)
******************************************************
* DA16200 SDK Information
* ---------------------------------------------------
