UM-B-049
DA14585/DA14586 Getting Started Guide with the PRO-Development Kit
User Manual
Revision 2.1
21-09-2018
CFR0012-00 Rev 2
20 of 30
© 2018 Dialog Semiconductor
Figure 21: Blinky Project: Jlink setup
7.
Click
OK
to save the settings in both windows. All settings have now been saved and you can
continue to build the example.
8.
Build the project by pressing
F7
key, or clicking the
Build
button, see
Figure 22
.
Figure 22: Blinky Project: Project Building
9.
Make sure you have a UART connection between your PC and the motherboard, as shown in
Figure 7
. Check the COM number on your PC.
10. Open Tera Term, choose the COM port from step 9, and click
OK
.
11. In Tera Term, Select
Setup > Serial Port
to configure the port as shown in
Table 1
.
12. In Keil, select
Debug > Start/Stop Debug Session
.
