8.DMX
8.DMX
8.DMX
8.DMX Channels
Channels
Channels
Channels
Mode/Channel
Mode/Channel
Mode/Channel
Mode/Channel
Function
Function
Function
Function
Values
Values
Values
Values
Description
Description
Description
Description
16B
8B
DE
1
1
11
Pan
0-255
PAN Movement
2
Pan Fine
0-255
Fine control of Pan movement
3
2
12
Tilt
0-255
Tilt Movement
4
Tilt Fine
0-255
Fine control of Tilt movement
5
3
3
Color
0-015
Open/White
016-031
Color 1
032-047
Color 2
048-063
Color 3
064-079
Color 4
080-095
Color 5
096-111
Color 6
112-127
Color 7
128-189
Forwards rainbow effect from fast to slow
190-193
Color rotation stop
194-255
Backwards rainbow effect from slow to fast
6
4
4
Gobo 1
0-009
Open
010-019
Gobo 1
020-029
Gobo 2
030-039
Gobo 3
040-049
Gobo 4
050-059
Gobo 5
060-069
Gobo 6
070-079
Gobo 7
080-099
Gobo 1 shake slow to fast
100-119
Gobo 2 shake slow to fast
120-139
Gobo 3 shake slow to fast
140-159
Gobo 4 shake slow to fast
periodic safety inspection of all installation material and the fixture. If you lack these qualifications,
do not attempt the installation yourself. Improper installation can result in bodily injury.
Be sure to complete all rigging and installation procedures before connecting the main power cord
to the appropriate wall outlet.
Clamp
Clamp
Clamp
Clamp Mounting:
Mounting:
Mounting:
Mounting:
The IS200-MH provides a unique mounting bracket assembly that integrates
the bottom of the base, the included “Omega Bracket,” and the safety cable rigging point in one
unit (see the illustration below). When mounting this fixture to truss be sure to secure an
appropriately rated clamp to the included omega bracket using a M10 screw fitted through the
center hole of the “omega bracket”. As an added safety measure be sure to attached at least one
properly rated safety cable to the fixture using on of the safety cable rigging point integrated in the
base assembly
Regardless of the rigging option you choose for your IS200-MH, always be sure to secure your
fixture with a safety cable. The fixture provides a built-in rigging point for a safety cable on the
hanging bracket as illustrated above. Be sure to only use the designated rigging point for the
safety cable and never secure a safety cable to a carrying handle.
5.
5.
5.
5. DMX-512
DMX-512
DMX-512
DMX-512 control
control
control
control connections
connections
connections
connections
Connect the provided XLR cable to the female 3-pin XLR output of your controller and the other
side to the male 3-pin XLR input of the moving head. You can chain multiple
Moving head together through serial linking. The cable needed should be two core, screened
cable with XLR input and output connectors. Please refer to the diagram below.
DMX-512 connection with DMX terminator
